version 2.0.75
localdomain;localhost.localdomain:diskstats_iops.sde.graph_title IOs for /dev/sde
localdomain;localhost.localdomain:diskstats_iops.sde.graph_args --base 1000
localdomain;localhost.localdomain:diskstats_iops.sde.graph_vlabel Units read (-) / write (+)
localdomain;localhost.localdomain:diskstats_iops.sde.graph_category disk
localdomain;localhost.localdomain:diskstats_iops.sde.graph_info This graph shows the number of IO operations pr second and the average size of these requests.  Lots of small requests should result in in lower throughput (separate graph) and higher service time (separate graph).  Please note that starting with munin-node 2.0 the divisor for K is 1000 instead of 1024 which it was prior to 2.0 beta 3.  This is because the base for this graph is 1000 not 1024.
localdomain;localhost.localdomain:diskstats_iops.sde.graph_order rdio wrio avgrdrqsz avgwrrqsz
localdomain;localhost.localdomain:diskstats_iops.sde.avgrdrqsz.type GAUGE
localdomain;localhost.localdomain:diskstats_iops.sde.avgrdrqsz.graph no
localdomain;localhost.localdomain:diskstats_iops.sde.avgrdrqsz.min 0
localdomain;localhost.localdomain:diskstats_iops.sde.avgrdrqsz.graph_data_size normal
localdomain;localhost.localdomain:diskstats_iops.sde.avgrdrqsz.update_rate 300
localdomain;localhost.localdomain:diskstats_iops.sde.avgrdrqsz.label dummy
localdomain;localhost.localdomain:diskstats_iops.sde.avgrdrqsz.draw LINE1
localdomain;localhost.localdomain:diskstats_iops.sde.avgwrrqsz.min 0
localdomain;localhost.localdomain:diskstats_iops.sde.avgwrrqsz.negative avgrdrqsz
localdomain;localhost.localdomain:diskstats_iops.sde.avgwrrqsz.type GAUGE
localdomain;localhost.localdomain:diskstats_iops.sde.avgwrrqsz.graph_data_size normal
localdomain;localhost.localdomain:diskstats_iops.sde.avgwrrqsz.label Req Size (KB)
localdomain;localhost.localdomain:diskstats_iops.sde.avgwrrqsz.update_rate 300
localdomain;localhost.localdomain:diskstats_iops.sde.avgwrrqsz.draw LINE1
localdomain;localhost.localdomain:diskstats_iops.sde.avgwrrqsz.info Average Request Size in kilobytes (1000 based)
localdomain;localhost.localdomain:diskstats_iops.sde.rdio.draw LINE1
localdomain;localhost.localdomain:diskstats_iops.sde.rdio.update_rate 300
localdomain;localhost.localdomain:diskstats_iops.sde.rdio.label dummy
localdomain;localhost.localdomain:diskstats_iops.sde.rdio.graph_data_size normal
localdomain;localhost.localdomain:diskstats_iops.sde.rdio.type GAUGE
localdomain;localhost.localdomain:diskstats_iops.sde.rdio.graph no
localdomain;localhost.localdomain:diskstats_iops.sde.rdio.min 0
localdomain;localhost.localdomain:diskstats_iops.sde.wrio.draw LINE1
localdomain;localhost.localdomain:diskstats_iops.sde.wrio.update_rate 300
localdomain;localhost.localdomain:diskstats_iops.sde.wrio.label IO/sec
localdomain;localhost.localdomain:diskstats_iops.sde.wrio.graph_data_size normal
localdomain;localhost.localdomain:diskstats_iops.sde.wrio.type GAUGE
localdomain;localhost.localdomain:diskstats_iops.sde.wrio.negative rdio
localdomain;localhost.localdomain:diskstats_iops.sde.wrio.min 0
localdomain;localhost.localdomain:diskstats_throughput.sdh.graph_title Disk throughput for /dev/sdh
localdomain;localhost.localdomain:diskstats_throughput.sdh.graph_args --base 1024
localdomain;localhost.localdomain:diskstats_throughput.sdh.graph_vlabel Pr ${graph_period} read (-) / write (+)
localdomain;localhost.localdomain:diskstats_throughput.sdh.graph_category disk
localdomain;localhost.localdomain:diskstats_throughput.sdh.graph_info This graph shows disk throughput in bytes pr ${graph_period}.  The graph base is 1024 so KB is for Kibi bytes and so on.
localdomain;localhost.localdomain:diskstats_throughput.sdh.graph_order rdbytes wrbytes
localdomain;localhost.localdomain:diskstats_throughput.sdh.wrbytes.graph_data_size normal
localdomain;localhost.localdomain:diskstats_throughput.sdh.wrbytes.min 0
localdomain;localhost.localdomain:diskstats_throughput.sdh.wrbytes.negative rdbytes
localdomain;localhost.localdomain:diskstats_throughput.sdh.wrbytes.type GAUGE
localdomain;localhost.localdomain:diskstats_throughput.sdh.wrbytes.draw LINE1
localdomain;localhost.localdomain:diskstats_throughput.sdh.wrbytes.label Bytes
localdomain;localhost.localdomain:diskstats_throughput.sdh.wrbytes.update_rate 300
localdomain;localhost.localdomain:diskstats_throughput.sdh.rdbytes.label invisible
localdomain;localhost.localdomain:diskstats_throughput.sdh.rdbytes.update_rate 300
localdomain;localhost.localdomain:diskstats_throughput.sdh.rdbytes.draw LINE1
localdomain;localhost.localdomain:diskstats_throughput.sdh.rdbytes.graph no
localdomain;localhost.localdomain:diskstats_throughput.sdh.rdbytes.min 0
localdomain;localhost.localdomain:diskstats_throughput.sdh.rdbytes.type GAUGE
localdomain;localhost.localdomain:diskstats_throughput.sdh.rdbytes.graph_data_size normal
localdomain;localhost.localdomain:if_err_enp2s0.graph_order rcvd trans rcvd trans rxdrop txdrop collisions
localdomain;localhost.localdomain:if_err_enp2s0.graph_title enp2s0 errors
localdomain;localhost.localdomain:if_err_enp2s0.graph_args --base 1000
localdomain;localhost.localdomain:if_err_enp2s0.graph_vlabel packets in (-) / out (+) per ${graph_period}
localdomain;localhost.localdomain:if_err_enp2s0.graph_category network
localdomain;localhost.localdomain:if_err_enp2s0.graph_info This graph shows the amount of errors, packet drops, and collisions on the enp2s0 network interface.
localdomain;localhost.localdomain:if_err_enp2s0.rcvd.update_rate 300
localdomain;localhost.localdomain:if_err_enp2s0.rcvd.label errors
localdomain;localhost.localdomain:if_err_enp2s0.rcvd.warning 1
localdomain;localhost.localdomain:if_err_enp2s0.rcvd.type COUNTER
localdomain;localhost.localdomain:if_err_enp2s0.rcvd.graph no
localdomain;localhost.localdomain:if_err_enp2s0.rcvd.graph_data_size normal
localdomain;localhost.localdomain:if_err_enp2s0.collisions.label collisions
localdomain;localhost.localdomain:if_err_enp2s0.collisions.update_rate 300
localdomain;localhost.localdomain:if_err_enp2s0.collisions.type COUNTER
localdomain;localhost.localdomain:if_err_enp2s0.collisions.graph_data_size normal
localdomain;localhost.localdomain:if_err_enp2s0.rxdrop.update_rate 300
localdomain;localhost.localdomain:if_err_enp2s0.rxdrop.label drops
localdomain;localhost.localdomain:if_err_enp2s0.rxdrop.type COUNTER
localdomain;localhost.localdomain:if_err_enp2s0.rxdrop.graph no
localdomain;localhost.localdomain:if_err_enp2s0.rxdrop.graph_data_size normal
localdomain;localhost.localdomain:if_err_enp2s0.trans.label errors
localdomain;localhost.localdomain:if_err_enp2s0.trans.update_rate 300
localdomain;localhost.localdomain:if_err_enp2s0.trans.warning 1
localdomain;localhost.localdomain:if_err_enp2s0.trans.negative rcvd
localdomain;localhost.localdomain:if_err_enp2s0.trans.type COUNTER
localdomain;localhost.localdomain:if_err_enp2s0.trans.graph_data_size normal
localdomain;localhost.localdomain:if_err_enp2s0.txdrop.negative rxdrop
localdomain;localhost.localdomain:if_err_enp2s0.txdrop.type COUNTER
localdomain;localhost.localdomain:if_err_enp2s0.txdrop.graph_data_size normal
localdomain;localhost.localdomain:if_err_enp2s0.txdrop.label drops
localdomain;localhost.localdomain:if_err_enp2s0.txdrop.update_rate 300
localdomain;localhost.localdomain:if_enp2s0.graph_order down up down up
localdomain;localhost.localdomain:if_enp2s0.graph_title enp2s0 traffic
localdomain;localhost.localdomain:if_enp2s0.graph_args --base 1000
localdomain;localhost.localdomain:if_enp2s0.graph_vlabel bits in (-) / out (+) per ${graph_period}
localdomain;localhost.localdomain:if_enp2s0.graph_category network
localdomain;localhost.localdomain:if_enp2s0.graph_info This graph shows the traffic of the enp2s0 network interface. Please note that the traffic is shown in bits per second, not bytes. IMPORTANT: On 32-bit systems the data source for this plugin uses 32-bit counters, which makes the plugin unreliable and unsuitable for most 100-Mb/s (or faster) interfaces, where traffic is expected to exceed 50 Mb/s over a 5 minute period.  This means that this plugin is unsuitable for most 32-bit production environments. To avoid this problem, use the ip_ plugin instead.  There should be no problems on 64-bit systems running 64-bit kernels.
localdomain;localhost.localdomain:if_enp2s0.up.graph_data_size normal
localdomain;localhost.localdomain:if_enp2s0.up.min 0
localdomain;localhost.localdomain:if_enp2s0.up.negative down
localdomain;localhost.localdomain:if_enp2s0.up.cdef up,8,*
localdomain;localhost.localdomain:if_enp2s0.up.type DERIVE
localdomain;localhost.localdomain:if_enp2s0.up.max 1000000000
localdomain;localhost.localdomain:if_enp2s0.up.info Traffic of the enp2s0 interface. Maximum speed is 1000 Mb/s.
localdomain;localhost.localdomain:if_enp2s0.up.label bps
localdomain;localhost.localdomain:if_enp2s0.up.update_rate 300
localdomain;localhost.localdomain:if_enp2s0.down.cdef down,8,*
localdomain;localhost.localdomain:if_enp2s0.down.type DERIVE
localdomain;localhost.localdomain:if_enp2s0.down.min 0
localdomain;localhost.localdomain:if_enp2s0.down.graph no
localdomain;localhost.localdomain:if_enp2s0.down.graph_data_size normal
localdomain;localhost.localdomain:if_enp2s0.down.update_rate 300
localdomain;localhost.localdomain:if_enp2s0.down.label received
localdomain;localhost.localdomain:if_enp2s0.down.max 1000000000
localdomain;localhost.localdomain:diskstats_iops.sdh.graph_title IOs for /dev/sdh
localdomain;localhost.localdomain:diskstats_iops.sdh.graph_args --base 1000
localdomain;localhost.localdomain:diskstats_iops.sdh.graph_vlabel Units read (-) / write (+)
localdomain;localhost.localdomain:diskstats_iops.sdh.graph_category disk
localdomain;localhost.localdomain:diskstats_iops.sdh.graph_info This graph shows the number of IO operations pr second and the average size of these requests.  Lots of small requests should result in in lower throughput (separate graph) and higher service time (separate graph).  Please note that starting with munin-node 2.0 the divisor for K is 1000 instead of 1024 which it was prior to 2.0 beta 3.  This is because the base for this graph is 1000 not 1024.
localdomain;localhost.localdomain:diskstats_iops.sdh.graph_order rdio wrio avgrdrqsz avgwrrqsz
localdomain;localhost.localdomain:diskstats_iops.sdh.avgrdrqsz.graph_data_size normal
localdomain;localhost.localdomain:diskstats_iops.sdh.avgrdrqsz.min 0
localdomain;localhost.localdomain:diskstats_iops.sdh.avgrdrqsz.graph no
localdomain;localhost.localdomain:diskstats_iops.sdh.avgrdrqsz.type GAUGE
localdomain;localhost.localdomain:diskstats_iops.sdh.avgrdrqsz.draw LINE1
localdomain;localhost.localdomain:diskstats_iops.sdh.avgrdrqsz.label dummy
localdomain;localhost.localdomain:diskstats_iops.sdh.avgrdrqsz.update_rate 300
localdomain;localhost.localdomain:diskstats_iops.sdh.wrio.update_rate 300
localdomain;localhost.localdomain:diskstats_iops.sdh.wrio.label IO/sec
localdomain;localhost.localdomain:diskstats_iops.sdh.wrio.draw LINE1
localdomain;localhost.localdomain:diskstats_iops.sdh.wrio.type GAUGE
localdomain;localhost.localdomain:diskstats_iops.sdh.wrio.min 0
localdomain;localhost.localdomain:diskstats_iops.sdh.wrio.negative rdio
localdomain;localhost.localdomain:diskstats_iops.sdh.wrio.graph_data_size normal
localdomain;localhost.localdomain:diskstats_iops.sdh.rdio.graph_data_size normal
localdomain;localhost.localdomain:diskstats_iops.sdh.rdio.type GAUGE
localdomain;localhost.localdomain:diskstats_iops.sdh.rdio.graph no
localdomain;localhost.localdomain:diskstats_iops.sdh.rdio.min 0
localdomain;localhost.localdomain:diskstats_iops.sdh.rdio.draw LINE1
localdomain;localhost.localdomain:diskstats_iops.sdh.rdio.update_rate 300
localdomain;localhost.localdomain:diskstats_iops.sdh.rdio.label dummy
localdomain;localhost.localdomain:diskstats_iops.sdh.avgwrrqsz.min 0
localdomain;localhost.localdomain:diskstats_iops.sdh.avgwrrqsz.negative avgrdrqsz
localdomain;localhost.localdomain:diskstats_iops.sdh.avgwrrqsz.type GAUGE
localdomain;localhost.localdomain:diskstats_iops.sdh.avgwrrqsz.graph_data_size normal
localdomain;localhost.localdomain:diskstats_iops.sdh.avgwrrqsz.label Req Size (KB)
localdomain;localhost.localdomain:diskstats_iops.sdh.avgwrrqsz.update_rate 300
localdomain;localhost.localdomain: